top of page
Search
Reading Residential Radon Test Results Clearly

Reading Residential Radon Test Results Clearly

Eric Price
6 days ago
6 min read

A radon result is not a pass-or-fail grade on a house. When reading residential radon test results, the number matters, but so do the testing conditions, the length of the test, and where the device was placed. For a buyer approaching a South Jersey closing, those details determine whether the result supports moving forward, requesting mitigation, or taking a closer look before contingency deadlines expire.

Radon is an odorless radioactive gas that enters a building from the soil. It commonly moves through cracks and openings in foundations, crawlspaces, utility penetrations, sump areas, and floor drains. A home can look well maintained, have no basement odors, and still test high. That is why a radon test should be treated as a measurement of indoor conditions, not a visual defect that can be identified during a standard walkthrough.

Start With the Radon Number

Residential radon results are reported in picocuries per liter of air, written as pCi/L. The U.S. Environmental Protection Agency recommends taking action when a result is 4.0 pCi/L or higher. In a real estate transaction, that typically means discussing a radon mitigation system with the seller, subject to the contract terms and inspection contingency.

A result below 4.0 pCi/L does not mean the home contains no radon. It means the tested average was below the EPA action level during that testing period. The EPA also recognizes that levels between 2.0 and 4.0 pCi/L may warrant consideration of mitigation, particularly when a buyer plans to spend substantial time in the lowest living area of the home.

Here is the practical way to read the number:

  • Below 2.0 pCi/L: Generally a low result for the test period.

  • 2.0 to 3.9 pCi/L: Below the action level, but still a measurable radon concentration that some buyers choose to address.

  • 4.0 pCi/L or higher: At or above the EPA action level. Further action is recommended.

  • Very elevated results: A high number should be addressed promptly, but it does not automatically mean the home is unsafe to purchase. It means mitigation and follow-up testing should be handled correctly.

In our experience with Atlantic County properties, the discussion is often less about whether a house is worth buying and more about making sure the result is documented, the next step is clear, and the final condition is verified after mitigation.

Reading Residential Radon Test Results Beyond the Average

The final average is the number most people focus on, but a quality report may also show hourly readings, minimum and maximum levels, test start and stop times, device location, and whether the equipment recorded possible interference. These details help establish whether the test was performed under acceptable conditions.

Short-term real estate tests usually run for at least 48 hours. This approach is practical for a purchase timeline, but radon levels can change from day to day. Rainfall, wind, temperature differences, heating and air conditioning operation, and how tightly a home is closed can all affect indoor readings. A 48-hour result is still useful when the test follows the required protocol, but it is not a lifetime average for the property.

If the report shows a 4.2 pCi/L average, for example, the fact that one hourly reading was much lower does not erase the overall result. Likewise, a brief higher spike does not necessarily mean the entire house consistently carries that level. The average, the test conditions, and the report’s validity all need to be considered together.

Why closed-house conditions matter

For a short-term radon test, windows and exterior doors should generally remain closed for at least 12 hours before the test begins and throughout the test period, except for normal entry and exit. Heating and cooling systems can operate normally. Whole-house fans, window fans, and other ventilation systems that significantly exchange indoor and outdoor air should not be used.

This is not a technicality. Open windows can artificially lower a radon reading, while unusual building conditions can produce a result that does not reflect normal occupancy. A reliable report should identify whether closed-house conditions were maintained and whether the device recorded events that could compromise the test.

Check Where the Device Was Placed

Radon testing is normally conducted in the lowest level that could be used regularly by occupants. That may be a basement, a finished lower level, or the first floor of a home built over a crawlspace. The location matters because radon concentrations often increase closer to the soil.

A device should not be placed in a kitchen, bathroom, laundry room, closet, or directly beside a sump pit, exterior door, window, or supply vent. These locations can distort the reading or fail to represent the air people actually breathe. It should also be positioned away from high heat, high humidity, and direct sunlight.

This point is especially relevant in South Jersey shore homes and seasonal properties. A lower-level room may be finished but rarely used, while another area may be the practical living space. A qualified inspector considers the property layout and the intended use of the space rather than simply setting a device in the lowest available corner.

Crawlspaces can change the conversation

Crawlspaces are common throughout South Jersey, including older shore-area homes and houses with additions built over different foundation types. A crawlspace is not usually the appropriate location for a standard residential radon monitor because it is not a regularly occupied living area. However, its condition can influence radon entry into the home above.

Damp crawlspaces, open soil, incomplete vapor barriers, gaps around plumbing penetrations, and uneven foundation transitions are conditions we regularly see during a home inspection in South Jersey. They do not prove that radon is elevated, but they help explain why a home may require a mitigation approach tailored to its foundation design.

Understand What a Valid Report Should Show

A radon report should make it easy to identify the property, testing dates, monitoring duration, device location, average result, and any indication of tampering or test interference. It should also state the measurement unit and provide a clear recommendation based on the result.

For buyers and real estate professionals, the chain of custody is also important. The report should establish that the device was placed and retrieved appropriately, rather than left for an occupant to manage. Continuous radon monitors can record hourly data and movement or power-related events, which provides an added layer of accountability during a transaction.

If a report is missing basic test information, shows a duration shorter than the required period, or indicates unusual ventilation during the test, a retest may be more appropriate than relying on an uncertain number. That can be frustrating near the end of a transaction, but it is better than negotiating around a result that cannot be defended.

What Happens When the Result Is 4.0 pCi/L or Higher?

A result at or above 4.0 pCi/L generally leads to a request for mitigation, a credit, or another negotiated solution. The right path depends on the purchase agreement, the property type, and the parties involved. From an inspection standpoint, the key issue is not simply installing equipment. It is confirming that the mitigation system is appropriate for the structure and that it performs as intended afterward.

Most mitigation systems use a fan to draw soil gases from beneath the slab, crawlspace membrane, or foundation area and discharge them safely above the roofline. Homes with multiple slabs, additions, crawlspaces, or mixed foundation conditions may need a more specialized design. Older housing stock can present additional challenges where inaccessible foundation areas or aging construction details affect how soil gas moves.

A post-mitigation radon test is the part buyers should not overlook. The installation itself is not proof of the final radon level. A follow-up test provides the confirmation that the system reduced the indoor concentration.

Avoid Overreacting to One Detail

Radon results deserve attention, but they should be put in proper perspective. Radon is a common and manageable condition. Unlike many hidden property issues, there is a well-established testing process and a commonly used corrective method. A high result should lead to a clear next step, not unnecessary alarm.

At the same time, buyers should not dismiss a result simply because a home has operated for years without a known concern. Radon has no smell, color, or obvious symptom. The absence of a prior test or mitigation system says very little about current indoor levels.

For a South Jersey buyer, the most useful report is one that is complete, properly conducted, and explained in plain language. Next Day Property Inspections approaches radon testing that way: the goal is to give clients a defensible result and enough context to make a sound decision before closing. A clear number, valid testing conditions, and a documented path forward are far more valuable than guessing what a basement or crawlspace might be hiding.

 
 
Infrared Logo.png
120 Day Icon.png
Drone Logo.png
1CMI-Logo-Alternate-NoShadow.png
Nachi CPI Logo.png
Mold Logo.png
WDI Logo.png
faa-licensed-drone-pilot-badge.png

Next Day Property Inspections LLC          Home Inspector License # 24GI00195800          Galloway, NJ, United States         Information@NextDayPropertyInspections.com          (609) 245-6002          © Copyright 2020

bottom of page